LBL 2-Circuit Monorail and Accessories
LBL 2-Circuit Monorail and Accessories
When designing your 2-Circuit Monorail System, the first step is to determine what you would like to light. Choose your decorative elements (fixtures) and where they should be installed to put the light where you want it. Layout your 2-Circuit Monorail run. Rail can be installed straight or can be field-bent to create an organic shape or follow architectural details. Pre-bent 2-Circuit Monorail options are offered for added flexibility. Once your layout is complete, measure the length of the run to determine the quantity and length of 2-Circuit Monorail sections required. Finish your run with a set of end caps. Determine how far from the ceiling that you would like to position the system. Use Telescoping Rigid Standoffs for curvy runs or if you want the ability to fine-tune the drop from the ceiling without any cutting. Adjustable cable standoffs offer a minimal appearance. Selecting a transformer is as easy as adding up the total wattage of all the lamps you will be using on the system. Remote transformers with Power Feed canopies offer a minimal appearance. Each transformer features two independent 120 or 277 volt circuits that may be switched independently. 24 volt transformers cannot be used with 2-Circuit Monorail. An example 2-Circuit monorail setup is shown below.
For configuration assistance, please contact our Sales Department at (866) 428-9289.
| 
