The Art of Air Management. Fan motors use copper windings, sealed precision steel bearings, and computer-controlled rotor / stator alignment to ensure minimal noise and optimal air circulation.
For an 8 ft bedroom ceiling this Artemis model is the right one, correct? no remote? I am prepared to order but really want a remote. hoe does the wall switch work? I assume you can have light on without fan and vice versa. TY, Lisa
Hello there, and thanks for your interest in this design. Yes there is a remote where you can choose between 6 airflow speeds, operate the light on/off, change the direction of blade rotation for warm or cool months, or turn the entire unit on/off. Detailed instructions for this fan and all of its components can be found by visiting the "specifications" tab on this product page and downloading the PDF manufacturer instruction sheet by clicking on the provided link. Keep in mind that 16.75" is the minimum length for this fan, meaning that it would come very, very close to the top of people's heads. If this seems to be cutting it too close, perhaps consider going with a "hugger" fan instead, which does not have a down rod. Should you require some additional clarification beyond this and would like to speak to a product specialist directly, feel free to give us a call anytime at 866.842.6209 and we can assist you. Thanks for contacting us! Parin YLighting Customer Service
Date published: 2015-03-30
Hi. I was wondering what type of white the "WH- High Gloss White" was. Is it a pure type of white or creamy type of white? Also, I already own an Artemis Fan and have the remote. If I buy another one, do I also need to purchase another remote? Thank you.
The High Gloss White is a little warmer white, but is not cream color. The remote control is included with this unit. If you wish to do a dual control setup or a combination or wall control and remote, Minka Aire can easily guide you on how to maximize your options. You can reach them at 800-221-7977. If you have additional questions, please call one of our knowledgeable product specialists! Brian, YLiving Customer Support 866-842-6209
Date published: 2016-02-07
Needing a fan for a 8'x10' cupola 25 ft. up. Cupola will have louvers to allow air flow up and out. Centered in the house over a 10' x20' balcony on the 2nd floor. House design encourages the venture (sp?) effect. for air flow.
Hi there. This seems like a good model for the space you described, especially because it is large enough and powerful enough to move air throughout your home in such a large space. The nice thing about this model is that it is fully compatible with the ¾" I.D. DR5 Series Downrods, meaning that you could swap out the down rod at any time and get a longer rod as well if you wanted the fan to hang lower in the cupola. Many fans do not offer this feature. To discuss this fan in greater depth, or to follow up with anything else, feel free to give us a call anytime at 866.842.6209 and we are more than happy to go over some options with you. Thanks for reaching out to us! Parin YLighting Customer Service
Date published: 2015-04-23
Is there a longer extension or hanging rod? The specs give a 6" hanging rod as the maximum.
Good question! To clarify; this comes with 3.5" and 6" downrods but is not limited to either. Minka Aire offers 3/4 Inch Dr5 Series Downrods starting at 12 inches (all non-flush mount Minka Aire fans come with 3.5" and 6" downrods) up to 72" in length! Check them out at http://www.ylighting.com/mnk-dr5.html . Thank you for your interest in the Artemis XL5 Ceiling Fan. Please let us know if we can offer any additional clarification beyond this - we are happy to help! Stephanie, YLighting Customer Service - 866.428.9289
Date published: 2015-06-15