Free Shipping on most orders

3/4 Inch Dr5 Series Downrods in Maple, 72 in. -Open Box

This product is no longer available.

Average Rating: 5 out of 5
Read Reviews (26)> Write a Review>
Pin It   Houzz

Related Info


Available options may differ from photo.

These ¾ inch ID downrods are for use with the Airus, Cobrea, Como, Concept I, eMotion, Artemis and Gyro ceiling fans only.

Minka Aire Ceiling Fans

As part of the Minka Group, Minka Aire is renowned for its quality craftsmanship and innovative design of its contemporary ceiling fans. "The Art of Air Management" reflects the dedication Minka Aire has to both aspects. We highlight the modern-styled models — Artemis, Concept I, Acero — with sleek lines and clean styling . In addition to form, Minka Aire gives a nod to function as well taking great pride in the quality of the fan motor using copper windings, sealed precision steel bearings, and computer-controlled rotor / stator alignment to ensure minimal noise and optimal air circulation. Shop Minka Aire ceiling fans or see our entire collection of ceiling fans here.

See more from Minka Aire

Write a Review
Customer Reviews 5 out of 5
5 out of 5
This Downrod made all the difference!

I had ordered the Artemis Ceiling Fan, completely oblivious to the fact that our contemporary home had exceptionally high, angled ceilings that would effect the placement and height of a ceiling fan. Thank goodness YLighting listed the category of Accessories alongside the Artemis Ceiling Fan Order, otherwise I'd never have even thought about the need for an extension rod!. The rod arrived with the fan, not separately, as I've had happen with other on-line companies and I was able to assemble the entire system without any difficulty. Additionally, the metal downrod matched the wood tone extremely well. Thanks for enabling me to establish the correct air flow pattern for my open, contemporary home with this Downrod! It made all the difference!

By:Joan Z. , Homeowner (Tucson, Arizona)

5 out of 5

Matches fan.

By:Jospeh v. , Designer (chicago)

4 out of 5
Perfect match...small amount of wiggle room

Perfect way to bring your fan down in a room with high ceilings. Does cause a bit of jiggling when the fan is on medium speed.

By:Jennifer Z.

5 out of 5
Perfect Match!

We have a 20 foot ceiling and required a longer downrod. The rod was a perfect match for the rest of the fan.

By:Bruce B. , Homeowner (Longwood, Florida)

5 out of 5
Happy to have it.

Good quality and matched the finish of the fan it holds perfectly.

By:John S. , Architect (Salt Lake)

5 out of 5
Goes perfect with the fan!

Perfect downrod for the fan and room. Color matches the fan exactly.

By:CHELSIE K. , Homeowner (Cobb, Wi)

5 out of 5
just perfect

Perfect match to my Artemis fans.Very good quality

By:aneta , Homeowner (glenview)

5 out of 5
Makes a big difference!

I purchased an Artemis Fan that comes with a 3" & 6" down rods. Unfortunately, I have a 10+ ft ceiling that requires a longer down rod. Therefore, I ended up purchasing a 12" down rod that allows the fan to circulates air so much better than if I had gone with the 3" or 6" down rod. The 12" down rod is very sturdy and does not wobble or make any noise at all. I'm glad I purchase it and would recommend it to anyone whose ceiling height is at least 10 ft.

By:sonoranbreeze , Homeowner (tucson, az)

5 out of 5
Quality basic downrod

Happy with this downrod - very good quality.

By:Stephanie , Homeowner (Raleigh)

5 out of 5
Great length choices available for down rod.

By:Lisa M. , Homeowner (Ross, Ca)

5 out of 5
worked well

By:H.M. , Homeowner (MD)

5 out of 5

By:Maxine L.

5 out of 5
The down rods for our Artemis Fans were exactly what we needed.

We ordered the beautiful Artemis ceiling fans but when we went to install them we realized that the vaulted ceilings wouldn't accommodate them. I called ylighting and the representative recommended these down rods. They looked great and worked perfectly in this application.

By:MDHD (Austin, TX)

5 out of 5
Perfect Length

The Acero fan is a perfect compliment to my mid-century modern, walnut bedroom furniture. Despite the atypical three blades, it moves the air as you would expect at all three settings. In one room I used the light kit and in another I did not. It looks beautiful both places. Currently the lighted fan in my bedroom is the sole light source and is plenty. YLighting was very helpful in locating the additional down rods I needed as well.

By:Karen P. , Homeowner (Fresno, CA)

4 out of 5

Matched perfectly and a cinch to install!

By:Kay , Homeowner (Houston, TX)

4 out of 5
Great fan and downrod

The Artemis fan needed the downrod to work right for a sloped ceiling. The downrod looks great and drops the fan to the correct height in the room. The combination of fan and downrod was perfect and enhances the room.

By:Bill N. , Homeowner (Westchester County, NY)

5 out of 5
Excellent downrod, great size selection.

I have 11' ceilings, and chose the 24" downrod. It's the perfect length for my height ceiling - it works so well that I have not had to use my air conditioner in my bedroom yet this summer. I like the dramatic look of the fan hanging two feet down, but I have yet to try the fan on speed 3 - I'm sure it will be fine (it was installed professionally on a steel beam and wooden cross bar in my ceiling) but the long downrod makes me nervous. I'll try speed 3 soon I'm sure.

By:Rebecca S. , Homeowner (Brooklyn. NY)

5 out of 5
a little bit of genius.

Because we live in a 100 year old building, the foot long downrod makes our fans workable with our beamed ceilings.

Thanks so much for designing them to match the particular fan instead of a generic "one size fits all."

By:Linda P. , Homeowner (new york, new york)

5 out of 5
It works as expected

I don't think that there is a lot to say about a downrod. It connected (as expected) to the fan and matched the brushed nickel appearance of the fan. Surprisingly no wobbling of the Concept 1 fan even with this 36" downrod.

By:David T. (Denver , CO)

5 out of 5
Gets the job done - well.

It might seem like a simple part, but I can't tell you how many times I've ordered an extension rod and had problems. Often the threading has metal shards on it still from manufacturing, or it's not a tight fit. This rod does what it's supposed to do.

By:Anonymous , Designer

5 out of 5
Downrod works

We purchased the 3' downrod to go with our new fan, and it works well.

By:Anonymous , Homeowner (Maryland)

5 out of 5
Matching downrods for Artemis.

Finishing touch to the fans I bought that needed to be suspended from a sloped ceiling.

By:Veronique S. , Homeowner (Virginia)

4 out of 5
great item

we really liked it

By:leah j. , Homeowner (katonah ny)

4 out of 5
Extra long downrods

Extra long downrods for ceiling fans with great rooms and high ceilings.

By:Tamara H. , Designer (NYC)

5 out of 5
Perfect extension!

The downrod in varying lengths were exactly what we needed to position the fan at the height we needed. It was easy to install and matched the fan perfectly.

By:Ann A. , Homeowner (indiana)

5 out of 5
many sizes for the perfect fit!

Ylighting's range of extension rods solve whatever problem needs a solution for ceiling fans and other devices. They feature different lengths in all commonly-specified metal finishes. Problem solved!

By:David M. , Architect (Boring, Maryland)

Free shipping

on most orders

Expert advice

+ service

Best collection

of modern designs

Price guarantee

100% price match