For light housing that integrates itself seamlessly into contemporary interior living spaces, the 3-Inch LED Remodel Adjustable Downlight Housing by Element is the fixture of choice. This fixture is ideal for below-the-ceiling installation that features a precise aiming mechanism with a 0-40 degree tilt and a 361-degree rotation. Trims are offered in a die-cast square or round, beveled or flat, flanged or flangeless. Bluetooth enabled for mobile light control.

The ELEMENT - 3 Inch LED Remodel Downlight Housing from TECH Lighting is offered with an 18-watt small aperture replaceable LED module. Constructed of heavy gauge cold rolled steel and die cast plaster plate (flangeless only) with durable matte black powder coat finish to maintain a dark aperture. With an overall height of 5 inches, this housing is designed for use in remodel installations with downlight trims.

The ELEMENT Reflections Collection utilizes a first-of-its-kind technology in LED recessed lighting, combining decorative domes with glare-free indirect lighting. ELEMENT Reflections redefines LED recessed lighting at a fundamental level by allowing downlights to become an essential decorative room component of a multi-layered lighting design.

The ELEMENT Reflections Collection utilizes a first-of-its-kind technology in LED recessed lighting, combining decorative domes with glare-free indirect lighting. ELEMENT Reflections redefines LED recessed lighting at a fundamental level by allowing downlights to become an essential decorative room component of a multi-layered lighting design.

Available in Airtight IC and Non-IC (see options below). Includes integral junction box approved for branch circuit through wiring. Dimmable with ELV or incandescent dimmer to 2-15 percent (typical) depending on dimmer.

The 3” Remodel housing for use with Halogen bulbs from the ELEMENT Recessed Lighting Collection is designed to fit easily within a 4.25” ceiling opening and can accommodate a ½ up to 2” ceiling thickness. Constructed of heavy gauge cold rolled steel with durable matte black powder coat finish to maintain a dark aperture. The junction box is connected via a 3 foot long flexible armored cabling to allow for ease of installation.

The ELEMENT Reflections Collection utilizes a first-of-its-kind technology in LED recessed lighting, combining decorative domes with glare-free indirect lighting. ELEMENT Reflections redefines LED recessed lighting at a fundamental level by allowing downlights to become an essential decorative room component of a multi-layered lighting design.

The Entra Adjustable New Construction Housing by Element allows easy downlight installation. The housing comes with butterfly brackets as well as adjustable steel hangar bars that allow for a seamless integration into contemporary interior environments like commercial lobbies and entryways as well as residential hallways and other areas. Housing is 90+ CRI and is made form die-cast aluminum for a very firm, durable application. All housings ship with optional plaster plate for flangeless installations.

The 3” LED New Construction Housing by Element is offered with a 18 watt small aperture replaceable LED module. It is constructed of heavy gauge cold rolled steel and die cast plaster plating (flangeless only) with a durable matte black powder coat finish to maintain a dark aperture. With 5 inches of overall height, this housing can be used in remodel installations, and is suitably paired with downlight or adjustable trims.

The 2 Inch Round LED Adjustable IC Housing by Element is a durable design that brings recessed lighting to a variety of rooms. Available flanged or flangeless, this piece is made from cold-rolled, heavy gauge steel that resists warping or sagging for a well-constructed addition to spaces. Lending an energy-efficient layer of illumination to spaces, the integrated LED can tilt zero to 45-degrees, rotate 361-degrees, and works with Element’s patented high-low lamp positioning to best complement the rooms it brightens.

The Entra Adjustable Remodel Housing by Element delivers ample amount of lighting in a recessed, contemporary housing that enables its versatile placement into commercial or residential environments. With a die-cast Aluminum trim, the Entra can be noted for its durability and is ensured in design for maximum longevity. The Entra utilizes hot aiming; it can be adjusted on a 0 to 30 degree tilt and is capable of 359 degree rotation. All housings ship with an optional plaster plate for flangeless installation.

The 3-Inch LED Adjustable Housing by Element is a recessed downlight that offers innovative custom abilities to home and commercial spaces. With a heavy gauge, cold rolled Steel body and a durable powder coated finish, this low-profile housing is built to last with a contractor and construction code friendly design. Tool-free aiming and locking work with a patented high/low lamp positioning, allowing for ambient and direct applications with easy adjustments. User-friendly tilting and a full 361-degree rotation ability lend this fixture additional convenience and is completed with a Die Cast Aluminum trim.

The 2 Inch Square LED Adjustable IC Housing from Element provides spaces with an elegant dose of light with a clean and unassuming form. The housing of the piece rests inside the ceiling, showing after the installation as a sharp square silhouette. An energy-efficient LED mounts within, emitting a bright glow that evenly spreads throughout the space for a beautiful and tasteful layer of illumination. The light can be precisely adjusted, creating a look perfect for what the room requires.

The 3-Inch LED Non-Adjustable Housing by Element is a low-profile option for recessed lighting, with a thoughtful design and durable construction. A patent-pending high-low lamp positioning allows for maximum light output and efficiency when LEDs are set closer to the aperture or can be set to minimize glare and flash on the Die Cast Aluminum trim when placed higher. Heavy gauge cold rolled Steel with a durable Powder Coat finish boasts minimal glare with no warping or sagging for a seamlessly constructed piece.

The 2 Inch Round Adjustable LED Remodel Housing by Element is a durable and directable way to bring a layer of energy-efficient light to spaces. With an innovative, high-low lamp positioning, this remodel housing allows for maximum light output, and a unique aiming and locking mechanism brings 361-degrees of rotation and zero to 45-degree tiltability to spaces. Available flanged or flangeless, this adjustable downlight can be installed in a variety of spaces for a well-constructed, practical way to brighten rooms.

The 2 Inch Round Adjustable Warm Dim LED Remodel Housing from Element provides a simple and practical lighting solution when looking to maintain a sleek aesthetic. A steady, warm beam of light is funneled through its circular opening, which is completely flush against the ceiling for a streamlined look. Its fully concealed housing contains an integrated LED light source for energy-efficient illumination, while an adjustable head allows for a customizable lighting display.

The 2 inch Square Adjustable Remodel Housing by Element is a well-constructed, durable piece made from cold-rolled, heavy gauge steel that will not sag or warp. A newly developed aiming and locking mechanism within offers 361-degrees of rotation, zero to 45-degree tiltability, and a patented high-low lamp positioning to eliminate dead spots, reduce glare and provide maximum output. Available flanged or flangeless, this installation lends spaces a directed layer of integrated, energy-efficient light that escapes through a square opening.

The 2 Inch Square Adjustable Warm Dim LED New Construction IC Housing by Element is a thoughtfully made option to bring energy-efficient, recessed lighting to spaces. A unique aiming and locking mechanism allows light output to be directed with a zero to 45-degree tilt, 361-degree rotation, and Element’s patented high-low lamp positioning. Available flanged or flangeless, this piece is made from cold-rolled, heavy-gauge steel for a high-quality housing that offers durability without sagging or warping.

The 2 Inch Round Adjustable Warm Dim LED New Construction IC Housing by Element offers a directable layer of energy-efficient light to spaces with a durable construction. A cold-rolled, heavy-gauge steel construction resists warping or sagging and houses Element’s unique aiming and locking mechanism that allows the adjustment of lighting with a 361-degree rotation and zero to 45-degree tiltability. Well-constructed, this housing offers warm dim LEDs, bringing an inviting quality of light to spaces that is reminiscent of the warm color halogen lights provide.

The 2 Inch Square Adjustable Warm Dim LED Remodel Housing by Element delivers high output, energy-efficient light to spaces with full adjustability. The warm dim offers lighting quality reminiscent of halogen fixtures to create a welcoming environment. A durable, cold-rolled, heavy-gauge steel construction resists warping and sagging for a well-constructed addition to rooms. Using Element’s patented high-low lamp positioning and a newly developed aiming and locking mechanism, the LED source can be tilted up to 45-degrees and rotated 361-degrees to best compliment the areas needing illumination.

The MR16 Low Voltage Multiple Spot Single Light Housing - MR-116HS by WAC Lighting is a new construction Non-IC housing. It requires 3” clearance from insulation on all sides and offers 30 degree vertical aiming capability, as well as 360 degree rotation on each element. Housing is equipped with intergral electronic transformer. Dimmable with electronic low voltage dimmer modern-switches.

The MR16 Low Voltage Multiple Spot Double Light Housing - MR-216HS by WAC Lighting is a new construction NON-IC housing. It requires 3” clearance from insulation on all sides. 30 degree vertical aiming capability and 360 degree rotation on each element make for excellent directional flexibility. The is equipped with intergral electronic transformer with 120V to 12V of power. The housing is dimmable with electronic low voltage dimmer modern-switches, and uses a pair of 50W 12V MR16 halogen lamps (not included).