• Eco-Friendly

    Eco Friendly

    Eco Friendly items utilize energy efficient technology or sustainable manufacturing processes to provide a product that saves operating costs while being a more responsible environmental choice.

    Eco Friendly products include Compact Fluorescent light bulbs, LED light bulbs, and items that utilize sustainable materials such as bamboo or use post consumer recycled content.

  • Energy Efficient

Design by NORA Lighting.

The Marquise 4" Air-Tight LED New Construction Housing is a new construction housing for use in non-insulated ceilings, where insulation can be kept 3" from fixtures. Rated for use with a line voltage lamp.


  • Plaster Frame: 0.040 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27" accessory flat bar hangers. Brackets run along all sides of frame to allow bar hangers to be run parallel or perpendicular to junction box.
  • Housing: 0.035 white baked enamel one-piece drawn steel. Adjustable for ceiling thickness from 0.625" to 1.375".
  • Clearance: Non-IC housings require a minimum clearance of 3" from thermal insulation and 0.5" from adjacent building components.
  • Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.
  • Bar Hangers: Two 13.75" to 24.5" adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90 degrees perpendicular to junction box if desired. "L" Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.
  • Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with seven 0.75" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
  • Thermal Protector: External thermal device is located on the junction box.
  • Trim: Compatible with Marquise 4" Trims (sold separately).
  • Wiring: Standard flex whip carries wire lead from junction box into housing. Wire leads extend from housing and thermal device to the luminary disconnect.
  • Driver: CREE LMD125 for 120V 850/1250 lumen. ERP ELM03W-0440-34 for 277V 850/1250 lumen.


  • 850 Lumen Triac dimming standard
  • Comfort Dim requires ELV dimmer
  • Consult factory for optional 0-10V dimming


  • UL Listed for Damp location with feed through
  • Meets or exceeds ASTM-E283 Air-Tight Requirements
  • Title 24 Compliant

  • Housing: 8.5"L X 5.625"W X 5.75"H
  • Cutout: 4.375"
Steel, aluminum
Lamp Type
Manufacturer Information
Click to download specifications.
Item Number
NHM-412LE1 NHM-412CLE1 NHM-412LE2 NHM-412CLE2