Pixel

Cable Lighting Single Circuit Cable

root
YLLIG43
null
null

Cable Lighting Single Circuit Cable

true
YLLIG43
$8.00
GIFT WITH CODE
In Stock
See Comparison
$8.00
See Comparison
$6.56
Made in: Germany
Related Products
The High-Line ADAPTER is needed when connecting Uni-Light ...
Description:
The High-Line ADAPTER is needed when connecting Uni-Light fixtures to High-Line cable. Two screw clamps at the end of the adapter rod enable quick installation and re-adjustments to the adapter's location. Suitable for 4” cable distance. Once installed, the Uni-light ...
The High-Line Calo Spot incorporates spring clips in ...
Description:
The High-Line Calo Spot incorporates spring clips in the socket to hold the MR16 lamp in place to make relamping tooless and simple. Two clamp bolts connect the fixture to the cable. Dimmable.
Direct connection to cable run to deliver low-voltage ...
Description:
Direct connection to cable run to deliver low-voltage power from transformer. One set needed per circuit. Recommended placement near center of run. For use with 8 and 10 gauge power cable. Available in chrome (ch) or matte chrome (mc).
The RONY uses an MR16 lamp that sits ...
Description:
The RONY uses an MR16 lamp that sits flush inside the metal lamp shade. The fixture head tilts 90 degree and rotates 360 degrees. Two clamp bolts connect the fixture to the cable run. Integrated adapter for use with High-Line ...
The TIGHTENING SET VARIO makes runs of almost ...
Description:
The TIGHTENING SET VARIO makes runs of almost any angle possible. Similar to the standard tightening set, twisting the center piece tightens the cable firmly with little effort. The added feature of the VARIO is the ball joint which gives ...
WAC Lighting’s InvisLED DMX Signal Wire is a ...
Description:
WAC Lighting’s InvisLED DMX Signal Wire is a lighting accessory built to extend the distance between the slave and master controllers. Total length of the piece is 120 inches and is Energy Star efficient. Main building material is wire.